Showing posts with label stripping. Show all posts
Showing posts with label stripping. Show all posts

Wednesday, 13 January 2016

Stripping the last of the hallway woodwork

It's taken me weeks and months to build up to finish this job, because it's just. so. ghastly.  I HATE stripping paint, and I really dislike sanding - it's just so dusty.

But as I'm starting to run out of jobs to do in the hallway, I'm starting to run out of excuses.  That and I had bought the carpet so I needed to crack on and get the painting done.

This is how I had left it before I painted the walls, so the majority of the architrave was done, but I still had the doorstops to do.


I tried to protect the flooring a bit with an old towel, but it still made a big old mess.


Years and years of layers and layers of paint...


The greeny coloured layer was really stubborn, to the point where the heat gun didn't seem to be shifting it.  I stopped for a rest and just thought I'd give it a go with the mouse sander with a really coarse grit sandpaper (40), and like magic, it all came right off - yay!  I'd already taken off layers and layers of paint before I got to this point, so I don;t think a mouse sander would have been time efficient without the heat gun first, but just look at this beauty.  Bare, naked wood.  All ready for a fresh lick of pure brilliant white paint.


The mess along the way...



I had to take off the kitchen door to get to all the nooks and crannies, and it's still off its hinges until I finish painting. Probably should get round to doing that...

All in all it took me a whole day to do 5 door frames (and remember that's 5 half, half, door frames really as I was only doing one side, and I had already done most of the architrave bit).  I wore safety glasses and a dust mask, but I think I should have been a bit more careful.  I was so ill that night and for a few days afterwards, that I'm not sure if I fumigated myself or something.  Not good.

But it's done! Finally!

I can;t believe how much I underestimated the job that is tackling a hallway/stairs.  It's just such a huge space as it's so tall, and it has sooooo many doors!  Ours has 8 in total - nuts.  This means lots of architraves, lots of corners, lots of tricky bits.  And stairs also mean lots of spindles to paint!  But I love how far it has come, just the last little bit to go now.

Which jobs have you done that you completely underestimated the time investment?


Tuesday, 13 October 2015

Hallway Progress - More Paint Stripping and Splash Coat

As I hadn't managed to get all the paint stripping of the architraves done before the plastering was done (see the post about that here), I had to finish it before painting.  I didn't want to run the risk of the emulsion on the wall blistering if I had painted the walls first.




I waited a few weeks for the plaster to be really dry, as I was worried the heat gun might cause it to crack.  It was generally fine, but there was one area which it cracked - eek! :(


I still have more to do around the door stops, I only did the edges next to the plaster, as I'm going to be honest, I was itching to get the paint on the wall!

So for fresh plaster, you have to paint on what is called a splash coat.  This is typically a watered-down emulsion coat, as the plaster will be really thirsty.  The plaster drinks in the water and it's a good starter coat before you put your more expensive colour coat on.  I generally use cheap white matt emulsion paint, but you can use any matt emulsion - just make sure you don't use vinyl emulsion.

I probably watered it down 50/50 to start with, so half paint half water.  The paint doesn't always mix well with water though - it takes a while to get it consistently mixed.  I actually used a whisk to get it all mixed - not conventional, but it got the job done!



The 50/50 mix was waaaay too much water!  So this happened...


Then I read the instructions on the paint tin, and it said 20% watered down on fresh plaster.  I measured out the paint to water ratio using a plastic cup and that worked well.

After I got the ratio right it went on much cleaner!





I did all this while the hubby was out so I had to leave the corners that I couldn't get to with the roller on an extension pole.  When he got home we got the ladder out and got those bits done.

I still need to sort the area of the loft hatch out.  I will actually change the loft hatch, but it's the area around it that will need a bit if thought and work.


There was one area of the ceiling down stairs that didn't take the paint too well - I'm not quite sure what was up with the plaster, but I wasn't particularly impressed with it.


Again, some more work required to this patch to sort it out.

What projects are you making progress with?